October has historically been a scary month in the stock market, but not this year, and MoneyShow’s Tom Aspray investigates whether November can top October’s strong performance.
The stock market surprised the majority of analysts again in October as the S&P was up 4.4%, the Nasdaq 100 was up 3.8%, and the Russell 2000 gained 2.5%. The Dow Industrials did a bit better than the small caps, for a change, as it was up 2.7% but the Dow Transports led the pack, up close to 6%.
Last summer, several analysts warned investors about the poor historical record for stock prices in September as in the past 60 years, the S&P was down on average 0.8%. The technical picture in early September had improved as many stocks had already reached good support.
At the end of September, many were again concerned about the potential for an “October crash” and the government shutdown caused some to sell in a panic. The dramatic rally from the October lows reinforces that it is better to invest or trade based on hard data not emotion.
Top China Companies For 2015: AudioCodes Ltd. (AUDC)
AudioCodes Ltd. and its subsidiaries design, develop, and market products and services for voice, data, and video over Internet protocol (IP) networks to service providers and channels, original equipment manufacturers, network equipment providers, and systems integrators in the United States, Europe, Asia, Latin America, and Israel. Its networking products consist of media gateways, enterprise session border controllers, multi-service business routers, IP phones, mobile voice over IP (VoIP), media servers, and various products that are tailored for Microsoft unified communication environments. The company also offers VoIP network assessment for enterprises; and value added applications for unified communications, as well as supports its networking products with a range of professional services. Its technology products comprise signal processor chips that process and compress voice, data, and fax, as well as enable connectivity between traditional telephone networks and pa cket networks; VoIP communications boards; media processing boards for enhanced services and functionalities; and voice and data logging hardware integration board products. AudioCodes Ltd. was incorporated in 1992 and is headquartered in Lod, Israel.
Advisors' Opinion:- [By Roberto Pedone]
AudioCodes (AUDC) and its subsidiaries design, develop and market products and services for voice, data and video over Internet protocol networks to service providers and channels, original equipment manufacturers, network equipment providers and systems integrators in the U.S., Europe, Asia, Latin America, and Israel. Its This stock closed up 8% to $6.73 in Tuesday's trading session.
Tuesday's Range: $6.23-$6.85
52-Week Range: $2.13-$7.07
Tuesday's Volume: 574,000
Three-Month Average Volume: 261,738From a technical perspective, AUDC spiked sharply higher here right above some near-term support at $6.04 with above-average volume. This move also pushed shares of AUDC into breakout territory, since the stock took out some near-term overhead resistance at $6.70. Shares of AUDC are now quickly moving within range of triggering another big breakout trade. That trade will hit if AUDC manages to clear Tuesday's high of $6.85 and then once it takes out its 52-week high at $7.07 with high volume.
Traders should now look for long-biased trades in AUDC as long as it's trending above some near-term support levels at $6.25 or $6.04 and then once it sustains a move or close above those breakout levels with volume that hits near or above 261,738 shares. If that breakout hits soon, then AUDC will set up to enter new 52-week-high territory, which is bullish technical price action. Some possible upside targets off that breakout are $8 to $9.
5 Best Heal Care Stocks To Invest In Right Now: Eco Building Products Inc (ECOB)
ECO Building Products, Inc. (ECOB), incorporated on March 21, 2007, is a manufacturer of wood products treated with an eco-friendly chemistry that protects against fire, mold/mycotoxins, fungus, rot-decay, wood ingesting insects and termites with ECOB WoodSurfaceFilm and fire retardant coating). ECOB�� newest product, Eco Red Shield also serves as a fire inhibitor protecting lumber from fire, slowing ignition time and reducing the amount of smoke produced. The Eco Building Products line includes dimensional lumber, wall and floor panels, I-joists, GluLam Beams, laminated veneer lumber (LVL) beams, truss lumber and trim. These products can be coated at its production facilities and at the mill or distributor with its formula and coating machines. Its products include Eco Red Shield, Eco Clear Shield, Eco Blue Shield, Eco Shelter, Eco Cabinets, Smart Components Seismic Walls, Eco LVL Beam, Eco I Joist, Eco Corbels, Eco Trim, Eco LVL Studs, and Calvert Curved Beams.
As of June 30, 2012, the Company owned 100% of E Build & Truss, Inc. (E Build), Red Shield Lumber, Inc. (Red Shield) and Seattle Coffee Exchange (Seattle). Red Shield was formed for the purpose of opening a plant in Canada utilizing the Company�� red coating process for sale and distribution. As of December 31, 2011, the wholly owned subsidiary had little operating activity. E Build was formed for the purpose of operating the Company�� Framing Labor and Truss manufacturing activities. ECOB has developed a line of eco-friendly protective wood coatings that extend the life of framing lumber and other wood used in the construction of single-family homes, multi-story buildings, as well as The Eco Shelter. In December 2011, the Company formed Seattle in the State of California. Seattle is a coffee shop which is located in the 1st floor of the Company�� corporate headquarters in Vista, California. This wholly owned subsidiary has not started its operations, as of June 30, 2012.
The Company�� eco-friendly formula ! controls moisture and protects lumber from mold, mildew, fungus, decay, rot, termites (and other wood boring insects including Formosan termites), while simultaneously serving as a fire inhibitor. The Company�� eco-friendly formula was designed for staining - it controls moisture and protects lumber from mold, mildew, fungus, decay, rot, termites while simultaneously serving as a fire inhibitor. ECOB�� eco-friendly formula controls moisture and protects lumber from mold, mildew, fungus, decay, rot, termites (and other wood boring insects including Formosan termites). Eco Red Shield Smart ComponentsO wall systems are pre-engineered seismic wall systems. The Company�� pre-engineered and pre-packaged kit comes pre-cut and ready to assemble with hammer and nails - the simple design makes it ideal for rapid response relief housing, events, offices, meeting halls, storage sheds, medical clinics and more. It is available in a range of sizes and floor plans.
Eco has delivered cabinet solutions for kitchen, bath, garage and office space. Smart Components is made with Eco Red Shield Protected Lumber for builders in seismic hot spots, such as California, Mexico and Japan. The I beam joist is eco-friendly solution to large structural beams. Laminated Eco Trim is protected on all six sides and available in any protective coatings providing a nearly impenetrable barrier against moisture, mold and insects. It also offers an ultra-smooth surface for painting and a clean, finished look that builders and homeowners desire.
The Company competes with Arch Chemical and Osmose, Inc.
Advisors' Opinion:- [By Peter Graham]
Small cap green stocks Eco Depot Inc (OTCMKTS: ECDP), Eco Building Products Inc (OTCMKTS: ECOB) and Profire Energy, Inc (OTCBB: PFIE) has been getting some extra attention lately in various investment newsletters thanks to paid promotions or investor relation campaigns. Of course, there is nothing wrong with properly disclosed promotions and investor relations campaigns, but small cap green stocks tend to be extra volatile when compared with other stocks. So how in greenbacks will these three small cap green stocks produce for investors? Here is a quick reality check:
5 Best Heal Care Stocks To Invest In Right Now: Allegheny Technologies Incorporated (ATI)
Allegheny Technologies Incorporated engages in the production and sale of specialty metals worldwide. It operates in three segments: High Performance Metals, Flat-Rolled Products, and Engineered Products. The High Performance Metals segment provides various high performance alloys, including nickel- and cobalt-based alloys and super alloys; titanium and titanium-based alloys; zirconium and related alloys, such as hafnium and niobium; other specialty alloys primarily in long product forms of ingots, billets, bars, shapes and rectangles, rods, wires, and seamless tubes; and precision forgings and castings, and machined parts. The Flat-Rolled Products segment provides stainless steel, nickel-based alloys, super alloys, titanium and titanium-based alloys, and specialty alloys in various product forms comprising plates, sheets, engineered strips, and precision rolled strip products, as well as grain-oriented electrical steel sheets. The Engineered Products segment produces carb on alloy steel impression die forgings, and grey and ductile iron castings, as well as provides precision metal processing services, such as grinding, polishing, blasting, cutting, flattening, and ultrasonic testing. The company serves various markets, including aerospace and defense, oil and gas, chemical process, electrical energy, medical, automotive, construction and mining, food equipment and appliances, transportation, electronics, communication equipment, computers, and machine and cutting tools markets; and other markets requiring tools with hardness. Allegheny Technologies Incorporated sells its products through direct sales and independent representatives. The company was founded in 1960 and is based in Pittsburgh, Pennsylvania.
Advisors' Opinion:- [By Ben Levisohn]
In our late October report on X, we noted the Company was “scratching the surface” on operational improvement, and we expected shares to edge higher over the near term. While X shares have appreciated by 16% since that report vs. the S&P 500 of +4% and the [Market Vectors Steel ETF (SLX)] of +3%, we believe shares have more room to run based on our positive carbon hot-rolled steel pricing revisions for 2014: meaningful raw material cost tailwinds (coal, scrap, iron ore); low Street EPS and EBITDA expectations for 2014-2015; an ever-increasing interest rate environment (benefits for pension exposure); more evidence of European macro stability; and above-average likelihood of incremental operational efficiency announcements such as a joint venture or tolling agreement with Allegheny Technologies Incorporated (ATI).
5 Best Heal Care Stocks To Invest In Right Now: LendingClub Corp (LC)
LendingClub Corporation, incorporated on October 2, 2006, provides online marketplace connecting borrowers and investors. The Company operates an online market that connects borrowers looking for loans with individuals with the money to fund them. It lends money to help consumers pay off credit-card bills, consolidate debt and take vacations. Its platform enables customers in investing in and obtaining personal loans by providing financial data and credit information.
The Company provides search algorithm, credit decisioning, a secondary market, and a choice of loan durations. The Company serves the professional fixed income investors, such as family offices and insurance companies.
Advisors' Opinion:- [By Rana Pritanjali]
Lending Club's (NYSE: LC ) stock is up a stellar 66% since the company went public in December. The peer-to-peer lending specialist offers an alternative to the traditional banking system with an online platform for borrowers and lenders. It has a leading 40% share of the�peer-to-peer lending market, far outstripping No. 2 player�Prosper.com and its 8% market share.�
No comments:
Post a Comment